+1 541-471-7111sales@metone.com

Heightened Public Awareness to Potential Hazards for Regulatory Compliance

In looking to detect and mitigate pollution sources not emanating from a smokestack, Fenceline Monitoring around industrial sites and energy pipelines is becoming more important as facilities must continue to minimize any potential release of particulate or chemical matter into local communities. Typical facilities have internal monitoring to ensure proper operation and control. Fenceline monitors are often provided as a backup to the normal monitoring and control system and can provide primary information if the situation requires it.

Communities near stationary emission sources such as petroleum refineries, petrochemical plants, waste incineration facilities, or ports may be subjected to pollutant levels higher than is seen at air quality monitoring stations located in the surrounding areas. Therefore, a portable carbon monitor could be useful in identifying fugitive emissions and easily identifying local sources of pollution.

Monitors may be stand-alone or networked together to cover an entire perimeter. Depending on the type of facility, monitors may report an issue directly to operations personnel for correction using a combination of visual and audio alarms or report directly to facility computers or even a cell phone.

ebam pm25 road

Fenceline Monitoring Products:

  • E-FRM-DC Reference Method Particulate Sampler

    The new and improved Met One Instruments, Inc. E-FRM-DC sampler is a single-event filter sampler to determine daily PM2.5 or PM10 particulate concentrations in ambient air. The E-FRM-DC has an innovative design and unique features that provide a versatile, reliable,...

  • E-Sampler Dual Ambient Monitor/Sampler

    Our E-SAMPLER is the most feature-packed light-scatter Aerosol Monitor available. Whatever your monitoring needs, the E-sampler will provide accurate, dependable and relevant data.

  • AQ EAGLE Air Quality Monitoring System

    Met One Instruments, Inc. AQ EAGLE is a system utilizing our ES-405 Particulate Profiler. The ES-405 continuously samples ambient air and reports particulate mass concentrations simultaneously and in real-time for PM10, PM4, PM2.5, and PM1. Our ES-405 is ideal for...

  • ES-405

    ES-405 Simultaneous Particulate Profiler

    The ES-405 is a near reference air quality sensor designed to provide accurate real-time measurements of PM10, PM4, PM2.5, and PM1 particulate concentrations simultaneously. It reports these four key particulate concentrations in both indoor and outdoor environments. The rugged weatherproof...

  • ES-412

    NEW ES-412 Portable Simultaneous Particulate Profiler

    Introducing the newest addition to Met One Instruments, Inc. line of Localized Particulate Monitors, the ES-412 Portable Simultaneous Particulate Profiler. As a Near-FEM (Federal Equivalent Method) product, the ES-412 provides the quality and day-to-day stability consistent with EPA quality objectives....

  • The ES-642 Remote Dust Monitor

    Remote Dust Monitor ES-642

    Met One Instruments’ ES-642 Remote Dust Monitor is an industrial air-quality sensor designed to provide real time particle concentration measurements in both indoor and outdoor environments. Our ES-642 measures particulate concentration using a highly sensitive forward scatter laser nephelometer, which...

  • Industrial Weather Station

    Met One Instruments’ Industrial Weather Stations are configured to provide plant operators with the weather data needed for operations, regulatory compliance, safety and emergency response. The systems use reliable and accurate sensors to measure the weather variables of interest. Depending...

  • ReadyWeather

    ReadyWeather Data-to-Desktop Weather Station

    ReadyWeather is the newest addition to the Met One Instruments, Inc. family of data-to-desktop products, designed with ease of use and data integrity in mind. This rapidly deployable weather station may be used in fixed or temporary installation applications, with...

  • General Purpose Weather Station

    General Purpose Weather Station

    Met One Instruments’ General Purpose Weather Station is specifically designed for monitoring ambient meteorological conditions. It is available in pre-packaged configurations for fast delivery; yet is easily customized with additional sensors and accessories to suit many measurement applications. The General...

  • Air Quality Weather Station

    Air Quality Weather Station

    Met One’s Air Quality Weather Stations are specifically configured to comply with U.S. Environmental Agency (EPA) and Nuclear Regulatory Commission (NRC) guidelines for air quality and regulatory meteorological monitoring. Stations are available in pre-packaged configuration for rapid delivery but can...

  • AIO 2 Sonic Weather Sensor - Met One Instruments

    Weather Sensor AIO 2 Sonic

    The AIO 2 Sonic Weather Sensor is a complete, high performance weather sensor using Met One Instruments’ proven 2D sonic technology. This technology provides reference grade accuracy without moving parts and includes a built-in compass used for automatic magnetic north...

  • MSO Weather Sensor - Met One Instruments

    MSO Weather Sensor

    The MSO is an integrated 5-parameter Weather Station. Wind Speed and Wind Direction are measured using conventional cup and vane techniques. All other measurements are housed in a multi-plate naturally aspirated radiation shield to reduce solar radiation heating errors. The...

  • CCS COMET Cloud Service - Met One Instruments

    CCS COMET Cloud+ Service

    Met One Instruments’ COMET Cloud Plus+ (CCS) is a cellular modem and cloud data service package which is directly compatible with a variety of air quality and meteorological sensors. The CCS modem is available for 4G LTE Domestic and GSM/...

  • 905 Portable Tripod

    The model 905 Tripod is a lightweight, collapsible aluminum and stainless steel tripod designed for rapid deployment and retrieval. It can be easily transported and erected by a single person. The tripod is intended to support a complement of weather...

  • Met One Comet Software

    Comet Software

    Comet software is a utility for extracting information (data, alarms, settings, etc.) from Met One Instruments’ products. The software is designed for the user to easily access information within a product without having to know underlying communications protocol for that...

  • Air Plus Software

    Air Plus software includes all of the functions required for the collection, viewing of data, and production of both tabular and graphic reports needed by most users of an air quality or other environmental monitoring system. It is designed for...

  • Swift 6.0 Flow Meter

    The Swift 6.0 is a multi-function Flow Meter specifically designed for accurate low rate measurements. The device’s easy to read display shows Flow Rate, Flow Temperature and Ambient Pressure. Flow measurements are traceable to our NIST standard and Certification is...

Contact Us